10 Best Stepper Motor For 3D Printer

1. STEPPERONLINE 5PCS Nema 17 Stepper Motor 1.5A 12V 45Ncm (63.74oz.in) 4-Lead …

STEPPERONLINE 5PCS Nema 17 Stepper Motor 1.5A 12V 45Ncm (63.74oz.in) 4-Lead 39mm Body W/ 1m Cable and Connector is an ideal choice for your DIY CNC, 3DPrinter and Extruder projects. The proven reliability and easy maintenance of this motor make it ideal for a wide variety of automated applications such as 2D printers, laser engravers, pick & place machines, camera positioning systems and the like.

This stepper motor has four leads which allows it to be connected in different configurations depending on the type of application it is being used for. The stator contains high-quality permanent magnets that produce a magnetic field to rotate the motor shaft. It can remain stationary in locations and also begins to rotate when voltage is applied.

The Nema 17 stepper motor also provides precise control over speed, torque, direction and the power consumed due to its high torque and low power consumption. It comes with 1m cables and connectors making it easy to setup and use.

This stepper motor is rated at 1.5A/12V/45Ncm (63.74oz.in) and has a body diameter of 39mm. Outstanding features of this Nema17 motor make it a well-suited choice for all your DIY CNC, 3D Printer, and Extruder applications!

• Brand: STEPPERONLINE
• Manufacturer: STEPPERONLINE
• Dimensions: Weight: 0.6172943336 Pounds `

Features

• 5 PCS, High torque Low noise
• Nema 17 stepper motor with step angle 1.8deg
• Holding Torque: 45Ncm(63.74oz.in), 12-24 VDC
• Rated Current/phase: 1.50A & Phase Resistance: 2.3ohms
• Build with 1m Pin Connector

Check Price

2. STEPPERONLINE 5PCS Nema 17 Stepper Motor Bipolar 2A 84oz.in 48mm …

StepperOnline 5PCS Nema 17 Stepper Motor Bipolar 2A 84oz.in 48mm 4-Lead is ideal for 3D Printer and CNC. It provides high torque, stability and reliability and high accuracy over a wide speed range. It is totally enclosed and has built-in over-temperature protection and non-polar rotor position sensor to ensure the motor’s stable operation.

The 48mm external length Nema 17 Stepper Motor features four-wire configuration for easy connection. The 2A motor offers a holding torque of up to 84oz-in and a rated voltage of 3.3V.

Nema 17 Stepper Motor Bipolar 2A 84oz.in 48mm 4-Lead is suitable for a wide range of applications such as robotics, CNC machines, textile machinery, stage lighting equipment, 3D printers and medical devices.

It is also compatible with a variety of controllers, such as Arduino, Raspberry Pi, and GRBL. With high performance, low sound and excellent energy conversion rate, this 2A motor ensures that your machines respond easily and quickly.

• Brand: STEPPERONLINE
• Manufacturer: OSM Technology Co.,Ltd.
• Dimensions: Weight: 0.8598028218 Pounds `

Features

• 5pcs/ Package
• 59Ncm(83.6oz.in) holding torque
• NEMA 17 bipolar 1.65″x1.65″x1.85″ 4-wire
• 1.8 deg. step angle(200 steps/rev)
• Rated current 2.0A & resistance 1.4ohms

Check Price

3. 3D Printer CNC Controller Ardiuno CNC kit with for ArduinoIDE,Longruner …

The Longruner GRBL CNC Shield Board+RAMPS 1.4 Mechanical Switch Endstop DRV8825 A4988 Stepper Motor Driver Nema17 Stepper Motor LKB02,Black is a complete Arduino CNC controller kit perfect for beginning your 3D printer and CNC projects.

This kit is designed to be used with the Arduino IDE development environment and comes with everything you need to turn your Arduino into a fully functioning 3D printer or CNC controller. It includes the Longruner GRBL CNC Shield Board, DRV8825 A4988 Stepper Motor Driver, Nema17 Stepper Motor, RAMPS 1.4 Mechanical Switch Endstop, heat sinks, screws and guide, and an easy-to-follow tutorial.

In addition, the Longruner GRBL CNC Shield Board has been upgraded to the recently released Arduino CNC Shield V3 which allows for smoother, more accurate cutting and eliminates many of the issues that users experienced with the earlier versions. Plus, with its black color, the Longruner GRBL CNC Shield Board adds a nice aesthetic touch to your machine’s look.

This kit is the perfect tool for the tech-savvy hobbyist, maker or student looking to start getting into 3D printing and CNC control. With it, you can build or customize your own 3D printers and CNC machines to your specifications and bring your projects and ideas to life.

• Brand: Longruner
• Manufacturer: Longruner
• Color: Black
• Dimensions: Height: 0.0393700787 Inches Width: 0.0393700787 Inches Length: 0.0393700787 Inches Weight: 0.8377565956 Pounds `

Features

• ★ Latest CNC Shield Expansion Board V3.0 ★-CNC shield board is updated version 3.0, which is suitable for CH340G Shield 3.0 version compatible with for ArduinoIDE, GRBL 0.9.
• ★ Professional 3D printer CNC Kit ★ This is a professional 3d printer DIY kit with multiple types of modules or components you need. It is a great assortment set for starters and professionals.
• ★ Premium Quality ★ Each part of this Logrunner 3d printer conk kit was made of premium material. These components can be used in a wide range of application.
• ★ DRV8825 Stepper Motor Driver with Heat Sinks ★ High quality stepper motor drive with 4 Aluminum Cooler, running within 2.5A current (Maximum), compatible with for ArduinoIDE software and hardware.
• ★ Good after-sales service. We’ll respond within 24 hours for any questions.

Check Price

4. Creality Official 42-40 Stepper Motor with Extruder Gear, 2 Phase …

The Creality Official 42-40 Stepper Motor with Extruder Gear is a high quality, reliable motor designed for 3D Printer Extruder. It is a two-phase 1A 1.8 degree 0.4 N.M motor compatible with the E-axis of the Ender 3, Ender 3 V2, Ender 3 pro, Ender 5 and CR-10 3D Printer.

It’s efficient, incredibly durable, and compatible with a variety of other 3D printer components. The motor has an incredibly fast operation speed and a decrease in sound levels for a smooth and quiet operation. Its over-temperature and over-current protection, and an automatic current reduction, ensure a safe and secure operation.

The motor offers an even higher torque compared to its counterparts and can operate at high speeds up to 6500rpm, making it suitable for a variety of 3D printing applications. The motor has a small size and lightweight build that makes it easy to install and reliable for operation.

Moreover, the built-in damping system can reduce the shaking of the stepper motor during operation. This motor is a great choice for DIY and commercial 3D printers.

• Brand: Comgrow
• Manufacturer: Creality 3D
• Color: Black

Features

• Official Guarantee: 100% Creality official stepper motor, our 42-40 stepper motor compatibility with Ender 3/Ender 3 V2/Ender 3 pro/Ender 5/5 pro/5 plus/Ender 3 max/CR-10/CR-10s/CR-10 V2/CR-10V3 3D Printer.
• Parameter: 1.8-degree step angle, 0.4 N.M holding torque, with 1A rated current per phase. (The connecting cable is not included.)
• High-Quality Stepping Motor: With low power, stable speed and performance, low noise, and no step loss during operation, which ensures the stable operation of the extrusion mechanism.
• Low Noise & High Precision: It fits perfectly with the high-strength synchronous wheel and synchronous gear, which ensures its high precision, reduces vibration and noise during work, and provides you with a relatively quiet printing environment.
• After-sales Service: If you have any unsolvable problems during installation and use, please feel free to contact us, our after-sales technical team will provide you with detailed solutions within 24 hours.

Check Price

5. JoyNano 480W Switching Power Supply 24V 20A AC-DC Converter Transformer …

The JoyNano 480W 24V/20A Switching Power Supply is one of the most advanced power supplies on the market, designed for industrial and commercial use. This upgraded version features improved performance and reliability, making it perfect for applications such as 3D printers, CCTV surveillance systems, LED displays, industrial automation, stepper motors, and many other electronics and devices.

The 480W 24V/20A Switching Power Supply features a wide input range of up to 220V AC for international usage, as well as adjustable output voltage from 0 to 24V and adjustable current from 0 to 20A. This powerful power supply supplies up to 960W of peak power and has a long service life thanks to its temperature controlled fan and single-screen display that provides real-time output current voltage and power values.

With its powerful and wide range of features, the JoyNano 480W 24V/20A Switching Power Supply is one of the best power supplies available for industrial and commercial use.

• Brand: JOYNANO
• Manufacturer: JoyNano
• Color: Silver
• Dimensions: Height: 1.968503935 Inches Width: 4.330708657 Inches Length: 8.4645669205 Inches

Features

• Converts AC voltage to 24V DC. LED Indicator.
• Output Current 20 Amp, Power 480 Watt. Efficiency more than 80%.
• Smart device surge protection for Shortage Protection, Overload Protection, Over Voltage Protection
• Widely used in 3D Printer, Industrial automation, LED display, communications, CNC Stepper, etc
• Efficient, long life, stable, and reliable – JoyNano Quality Warranty

Check Price

6. BIGTREETECH Octopus V1.1 32bit Control Board + TFT35 E3 V3.0.1 …

The BIGTREETECH Octopus V1.1 32bit Control Board + TFT35 E3 V3.0.1 Touch Screen Display + 8xTMC2209 V1.3 Stepper Motor Driver is the perfect DIY kit for those looking to build their own Voron V2.4 3D Printer Controller Board. This kit comes with a high performance 32bit ARM board for controlling all functions of the 3D Printer.

The BIGTREETECH Octopus V1.1 Board is extremely easy to set up and use. The on-board TFT35 E3 V3.0.1 Touch Screen Display simplifies the user experience significantly.

The combination of the BIGTREETECH Octopus and TFT35 E3 makes it easy for any maker to control all the peripherals on their machine and adjust settings to their own preferences.

The integrated 8xTMC2209 V1.3 Stepper Motor Driver drives the X, Y, Z, and extruder motors with precision and power. Additionally, the BIGTREETECH Octopus V1.1 Control Board will support the Klipper and Raspberry Pi operating systems.

The combination of all these components into one kit makes it the perfect solution for any Voron V2.4 3D Printer DIY enthusiast.

• Brand: BIQU
• Manufacturer: BIGTREETECH

Features

• ⭐SUPER PERFORMANCE CHIP: BIGTREETECH Octopus control adopts 32-bit ARM-level Cortex-M4 series STM32F446ZET6 chip with a frequency of up to 180MHz, and supports 8 stepper motors. Equipped with highly modular open source firmware Marlin2.0, which greatly improves the overall performance of the motherboard, and all the functions of the motherboard do not require any expansion modules, and supports running Klipper and Marlin firmware
• ⭐SUPER MULTI-FUNCTION CONTROL PANEL: Support material interruption detection, continuous printing after power failure, shutdown after printing, BL_Touch, support online printing, etc. Upgrading the configuration firmware through the SD card, the operation is simple, convenient and efficient. Using high-performance MOSFET, the heat dissipation effect is better.
• ⭐MULTI-FUNCTION DISPLAY: TFT35 E3 V3.0.1 touch screen has higher compatibility. You can choose two working modes: UART serial screen mode and 12864 screen mode. The WIFI port is reserved, and the WIFI function is implemented by an external WIFI module.SD card update firmware is simple and convenient, download from our github, copy and save to SD card
• ⭐ULTRA-QUIET DRIVER: TMC2209 v1.3 with SpreadCycle technology, enables high precision cycle-by-cycle current control for the highest dynamic motion. Large area thermal pad to reduce the temperature of the drive during operation. The motor is difficult to lose step. Can prevent motor vibration. The module supports STEP/DIR and UART modes.
• ⭐WORRY-FREE AFTER-SALES SERVICE: Do you have any questions? Or if you have any problems that need to be solved, please feel free to contact us, and we will arrange the most professional technical team to solve it for you until you are satisfied.

Check Price

7. Creality Official 42-40 Stepper Motor, 3D Printer X/Y-Axis Extruder Stepping …

The Creality Official 42-40 Stepper Motor is the perfect solution to upgrading 3D printers such as the CR-10 and Ender-3 series. This motor runs on 2 phase at 1A and 1.8 degree rotation per step, with a 0.4 N.M torque.

In addition to the XY-axis, it is also compatible with the E-axis (D-Shape). This is one of the best motors for 3D printing due to its performance and reliability. It is more powerful and accurate than many of the stock motors that come with these machines.

This motor is an easy upgrade to make, as it is specifically designed to be installed on those machines. By installing this motor, users can benefit from a smoother, higher-precision motion than with their original motor.

This motor is the perfect way to get the most out of 3D printing and can put an end to messy prints and irregularities. It is a reliable way to ensure consistent high-quality results.

• Brand: Creality 3D
• Manufacturer: Creality 3D
• Dimensions: Height: 1.574803148 Inches Width: 1.6535433054 Inches Length: 1.6535433054 Inches Weight: 0.6393405598 Pounds `

Features

• 👉【Quality security】Creality 100% official, Original 42-40 stepper motor applies for E-Axis of CR 10 Max/ CR 10 Smart/ CR 10S Pro V2/ CR 30/ CR 6 Max/ CR 6 SE/ CR X/ CR X Pro/ Ender 3 Max/ Ender 3 Neo; X-Axis of CR 10 Max/ CR 10S Pro V2/ CR X/ CR X Pro; Y-Axis of CR 10 Smart/ CR 10 V2/ CR 10 V3/ CR 6 SE/ Ender 3 Max/ Ender 3 Max Neo. The connecting cable is not included!
• ❤【High-quality Stepper Motor】3D Printer motor with low noise and efficient heat dissipation has large torque and high precision without losing steps. 1.8-degree step angle, 0.4N.M holding torque, with 1A rated current per phase. This means that you can save on the cost of replacing or repairing the engine.
• 🆗【Low Noise Stepper Motor】The high-quality motor with low power, uniform speed, stable performance, high accuracy, low noise, and no step to lose during the operation, which ensures the extrusion mechanism stable operation. This greatly reduces the vibration and noise when the motor is working, keeps you focused, and provides a quiet printing experience for colleagues and family.
• ⭕【Precise Rotation】Perfectly fits with the high-strength synchronous wheel and synchronous gear, it realizes accurate constant ratio, uniform revolution, and high transmission efficiency, while avoiding system errors and obtaining accurate results. Shaft diameter: 5mm(D-shape)
• 👍【Official Creality 3D Store】More than 20 engineers provide 24/7 customer service with 12-months limited and lifetime technical assistance. Please kindly contact us(seller) via “ask a question” find us directly, cause our customer service will respond to you within 24 hours no matter what question.

Check Price

8. Official Creality 3D Printer Ender 3 Dual Z-axis Upgrade Kit …

If you own a Creality 3D printer, you know the importance of having quality printing components and accessories. The Official Creality 3D Printer Ender 3 Dual Z-axis Upgrade Kit with Lead Screw, Metal Power Supply Holder and Stepper Motor is a must-have 3D printer upgrade kit if you own an Ender 3, Ender 3 Pro or Ender 3 V2.

This kit comes with all the necessary hardware and components to upgrade your 3D printer to the highest performance level. It includes a dual Z-axis lead screw, two TMC2208 stepper motor driver, two MK10 nozzles, two metal power supply holders, one X-axis nut assembly, two Y-axis nut assemblies, one extruder motor assembly and one mass flow rate controller.

This kit also includes four cooling fans, screws and quick nuts for your convenience. With this upgrade, you’ll experience considerable increase in stability and accuracy; it also reduces vibration when printing. With this 3D printer upgrade kit, you’ll be able to achieve an ease of 3D printer calibration and enjoy a larger printing size as well.

With its high quality components and accessories, this 3D printer upgrade kit has everything that you need to get your Ender 3, Ender 3 Pro or Ender 3 V2 up and running at its optimal performance.

• Brand: Creality 3D
• Manufacturer: Creality 3D
• Color: Ender 3 Dual Z Kit
• Dimensions: Height: 2.5590551155 Inches Width: 15.5511810865 Inches Length: 3.93700787 Inches Weight: 2.01 Pounds `

Features

• 【Increased Accuracy】Compared with original structure, dual Z-axis kit reduces the layer ripple caused by Z-axis vibration, avoiding backlog of filament thoroughly, which improves stability of 3D printing and increases the printing performance of 3D printer.
• 【Stable Performance】 Compared with Closed Timing Belt, this 3D printer parts set still retains the design of stepper motor to ensure screw rod smooth operation.
• 【Smooth Running】 Upgrade Single Z-axis structure to a dual Z-axis structure, will make the printer more easy to Leveling, both ends of the X axis are raised and lowered synchronously, which reduces difficulty and frequency of bed leveling obviously.
• 【High Comparable】The dual z axis upgrade kit is compatible with Ender 3/ Ender 3 Pro/ Ender 3 V2/Ender 3 Neo/Ender 3 V2 Neo 3D printer. Easily improve 3D printers with low cost efficiency to Dual Z axis mode.
• 【After Sales Service】Creality 3D pay great attention to the buyer’s user experience. If you have unsolvable problems during installation and use, please feel free to contact us, our after-sales technical team will provide you with detailed solutions within 24 hours.

Check Price

9. MKS SERVO42C NEMA17 Closed Loop Stepper Motor Driver Low Noise …

The MKS SERVO42C NEMA17 Closed Loop Stepper Motor Driver Low Noise is a great choice for the CNC 3D Printer setup. With features such as low noise during operation and the ability to prevent losing steps this driver is reliable and powerful.

It is compatible with Gen L SGen L SKR 2/V1.4 Turbo BTT Octopus V1.1 mainboard, guaranteeing a secure connection that will not be affected by voltage drops or surges. The motor driver also has multiple protection features, such as temperature and over-current protection, to keep the stepper motor and the setup running without any issues. All of these features make the MKS SERVO42C NEMA17 the best choice for your CNC 3D printer setup.

• Brand: HoCenWay
• Manufacturer: HoCenWay

Features

• MKS servo42C is a product developed by MKS to meet market demand. The closed-loop motor uses the motor’s rotation angle feedback to the drive circuit to detect whether every step that should be taken has been taken to prevent losing steps. If a closed loop occurs, the motor will make up or lose steps through the feedback information, and the blue LED on the closed loop module will light up.
• Support 1-256 subdivision,odd subdivision (such as 11 subdivision) is also available. And support motors with 0.9 degree or 1.8 degree. Maximum speed 1000RPM. With usart interface, you can connect the computer by serial port, for parameter adjustment and query.
• Position /speed/torque closed-loop, it can run at high speed without losing step. Easy to install and wire. The max printing speed can reach 150-180mm/S. Field-Oriented control, low noise, low vibration and low calorific. 4 Half bridge driver with 8 MOSFET, high operating efficiency. 14Bits magnetic encoder, high angle resolution.
• Compatible with Gen L SGen L, SKR 2 / V1.4 Turbo BTT Octopus V1.1 Motherboard and other board which is seperated with drivers, that means drivers is not soldered onto the board
• Package: 1*MKS SERVO42C(include motor) + 1*Adapter board(MKS APT) + 1*60cm 6pin Data Cable . (User method, please check the links from the following description)

Check Price

10. Twotrees 3D Printer CNC Controller Kit with for ArduinoIDE, GRBL …

The Twotrees 3D Printer CNC Controller Kit is the perfect choice for anyone who wants to enjoy the best of both worlds of 3D printing and CNC projects! This kit includes an ArduinoIDE GRBL CNC Shield Board A4988 Stepper Motor Driver and a Nema 17 Stepper Motor for superior precision and control.

It is compatible with a vast range of 3D printers and CNC projects and comes with pre-loaded GRBL firmware on the board to get started immediately. The shield board provides all of the necessary power options and can connect to a wide variety of heatbeds, extruders, and other peripherals to get you up and running quickly.

The Nema 17 Stepper Motor has the perfect size and torque to move the load efficiently and accurately. Together, the components of this kit provide an incredible value for anyone looking to explore the world of 3D printing and CNC projects. With a comprehensive manual, user-friendly instructions, and endless possibilities, this kit is a great way to get started on your next creative endeavor!

• Brand: Twotrees
• Manufacturer: Twotrees
• Color: Black

Features

• 〖3D Printer CNC Kit〗- This is a professional 3D printer DIY kit, with many types of modules or components you need. It is a great assortment set for starters and professionals.
• 〖Latest CNC Shield Expansion Board V3.0〗- The CNC Shield Board is an updated version of version 3.0, which is suitable for CH340G Shield 3.0 version compatible with ArduinoIDE, GRBL 0.9.
• 〖Nema 17 Stepper Motor〗- Stepper motor high torque (42Ncm(60oz.in) )，low self-inductance reactance, responsive and can avoid system error.Low loss stators have better high speed performance.Stepper Motors can be connected with 4 pin molex connectors or soldered in place
• 〖Stepper Motor Driver with Heat Sinks〗-Uses removable Pololu A4988 compatible stepper drivers. (A4988, DRV8825 and others) .Jumpers to set the Micro-Stepping for the stepper drivers. (Some drivers like the DRV8825 can do up to 1/32 micro-stepping )
• Runs on 12-36V DC. (At the moment only the Pololu DRV8825 drivers can handle up to 36V so please consider the operation voltage when powering the board.)

Check Price