How to Reset Rollo Printer? Best Step By Step Guide

If you need to know how to reset Rollo printer, there are a few simple steps you can follow. First, make sure that the printer is turned off and unplugged from the power source. Next, locate the reset button on the back of the printer. Once you have found the reset button, use a paperclip or other small object to press and hold the button for approximately 5 seconds. After 5 seconds have passed, release the reset button and then turn on your printer. If your printer does not turn on automatically, press the power button to turn it on. Your Rollo printer should now be reset and ready to use!

  • Power off your Rollo printer and unplug it from the power source
  • Remove any paper that may be jammed inside the printer
  • Locate the reset button on the back of the printer
  • This will usually be a small red or black button
  • Press and hold the reset button for 5-10 seconds, then release it
  • 5a) If your printer has a display screen, you should see a message indicating that the printer is resetting itself
  • 5b) If your printer does not have a display screen, you should hear 3 short beeps followed by 1 long beep, indicating that the self-reset is complete

Learn More:

How to Reset Rollo Printer?

If you need to reset your Rollo printer, there are a few different ways that you can do so. The most common way is to simply unplug the printer from its power source for a few seconds and then plug it back in. This should reset the printer and clear any error messages that may be displayed. If this does not work, or if you are unable to unplug the printer, you can also try resetting it through the control panel menu. To do this, first make sure that the printer is turned on.

  • Then, press and hold the ‘Menu’ button on the control panel for about 5 seconds until the menu appears.
  • Use the arrow keys to navigate to the ‘Setup’ option and press enter.
  • Navigate to the ‘Reset’ option and press enter again.
  • The printer will now go through a reboot process and should be reset once it has finished.

How to Reset a Wireless Rollo Printer?

What Should I Do If My Rollo Printer is Not Working Properly?

If your Rollo printer is not working properly, the first thing you should do is check the power cord and make sure it is plugged into a working outlet. If the power cord is plugged in and the printer still isn’t working, you may need to reset the printer. To do this, unplug the power cord from the printer and then plug it back in. Once the printer is reset, try printing again. If your Rollo printer still isn’t working properly after resetting it, you may need to contact customer support for further assistance.

How Can I Troubleshoot My Rollo Printer?

If you are having issues with your Rollo printer, there are a few things that you can do to troubleshoot the problem. First, make sure that the printer is properly connected to your computer and that it has power. Next, check to see if the paper tray is properly loaded and that there is no paper jam. If there is a paper jam, clear it according to the instructions in your user manual. Finally, try printing a test page to see if the issue has been resolved.

Conclusion

If you need to guide about how to reset Rollo printer, there are a few simple steps you can follow. First, make sure that the printer is turned off and unplugged from the power source. Next, remove any paper from the paper tray and open the printer cover. Locate the reset button on the control panel and press it for three seconds. Once the printer has been reset, you can plug it back in and turn it on.